Plastic Burn Needle Flame Test Apparatus Electrical Industry , Chemistry Flame Test Chamber

Plastic Burn Needle Flame Test Apparatus Electrical Industry , Chemistry Flame Test Chamber

Instrument

The Needle Flame Tester is a fully automatic instrument contained in its own cabinet to maximize the safety of the operator. The Needle Flame Tester consists of a diameter of 0.9mm needle burner that tilts to 45degree from the vertical and is fueled with butane gas. The test time for the temperature of the standard copper block to increase from 100 degree to 700 degree shall be 23.5s. Test flame height is adjusted 12mm.The fire hazard of the specimen is assessed by measuring the burning duration of the specimen, and any ignition of the wrapping tissue and white pine board below the specimen. The instrument is designed to conform to IEC60695-11-5, IEC60695-2-2 and other most commonly used standards in the market.

Application

Insulation and combustible materials used inside electrical and electronic products may propagate flames when a failed component ignites, which may develop into a fire that endangers the safety of operators and product operation. The Needle Flame Tester is used to assess the fire hazard of such component materials. The test is performed to determine that the test flame does not cause ignition of parts, or that a combustible part ignited by the test flame has a limited duration of burning or a limited extent of burning, without spreading fire by flames or burning or glowing particles falling from the test specimen.

5600 Needle flame tester

Technology data:

1. Accord with standard:IEC-60695,GB5169
2. Size:1120w*600d*1020h
3. Flame height adjust:5-45mm
4. Burning time adjust range:0-99.99s
5. Temperature display range:0-1200degree
6. Sustained combustion range:0~99.99s
7. Remainder combustion range:0~99.99s
8. Burning time Resolution rate:0.01s
9. Remainder time resolution rate:0.01s
10. Flame temperature resolution rate:1degree
11. Background of inner case:black(power baking varnish)

Features:

1. In accord with newest test standard
2. Import control component
3. 2mm cold panel power baking varnish inside case
4. Good aluminum anodizing special clamp
5. One-touch timing device
6. In accord with standard combustion apparatus
7. Armoured glass window

Standard configure:

1. Standard clamp
2. Flame height adjust device

Select configure:

1. high pure tetrane gas
2. flame temperature adjust device
3. other nonstandard clamp